Security Codes; Phone Password; Center Access Code - SoftBank 920SC User Manual

System Sounds
Available items vary by mode. Volume level set in
System sounds applies to all Phone sounds.
Item Description
All Check/uncheck all items.
Sounds for confirmations/
Popup box alerts
warnings.
Sounds about once a minute
Minute minder
during calls.
Sounds before called phone
Call connect tone rings to notify the call is going
to be connected.
Call end tone Sounds when a call ends.
Sounds when the power is
Power on
turned on.
Sounds when power is turned
Power off
off.
Sounds when 920SC is slid up/
Slide up/down
down.
Sounds for alarms/incoming
Alerts on call
transmissions during a call.
Advanced
s
r
Adjust volume ( P.12-13)
●
Set Ringtone for Voice Call/Video Call/S! Circle Talk
●
r
( P.12-13)
r
Set ringtone other than Voice Call (
●
Set ringtone duration other than Voice Call
●
r
( P.12-13)
r
,
Set Vibration ( P.12-13 P.12-14)
●
r
Set Keypad tones ( P.12-13)
●
r
Set system sounds for S! Circle Talk (
●
r
,
Set system sounds ( P.12-13 P.12-14)
●
Illuminate External Light for incoming transmissions
●
r
,
( P.12-13 P.12-14)
Illuminate External Light for missed calls (
●
P.12-14)
r
Set Answering Machine ( P.12-14)
●
r
Activate or cancel Offline mode (
●
Activate or cancel automatic ringer reduction
●
r
( P.12-24)
r
Change mode ( P.12-25)
●

Security Codes

Phone Password, Center Access Code and Network
Password are required are required to use 920SC.

Phone Password

P.12-13)
The 4-digit number (9999 by default) is required to
operate/change some handset functions.
Entered Phone Password digits are represented with
●
If incorrect, an error message appears. Try again
●
P.12-13)
Phone Password can be changed on 920SC
●
f
( P.10-2).
r

Center Access Code

P.12-13 ,
4-digit number specified at subscription; required
to change service subscriptions or to operate
P.12-24)
handset from landlines.
1
.
*
1-15