SoftBank 920SC User Manual page 13

Do not use handset with wet hands.
Doing so may lead to electric shock or damage to 920SC.
Charger
Use only the specified voltage.
Non-specified voltages may cause fire or electric shock.
AC Charger: AC 100V-240V Input
●
SoftBank is not liable for problems caused by charging handset abroad.
In-Car Charger: DC 12V/24V Input
●
Do not use step up/down transformers.
Use of the AC Charger with step up/down transformers may
cause fire, electric shock or damage.
Do not use In-Car Charger inside vehicles with a
positive earth.
Fire may result. Use In-Car Charger only inside vehicles with a
negative earth.
Do not touch plug blades with wet hands.
Electric shock may occur.
Do not plug multiple cords in one outlet.
Excess heat or fire may occur.
xii
Do not bend, twist, pull, or set objects on the cord.
Do not put heavy objects on the cords or heat or pull
the cords.
Fire or electric shock may result.
Do not short-circuit Charger Port.
Keep the metal away from Port. Overheating, fire, or electric
shock may result.
Be sure to secure In-Car Charger.
Avoid injury or accidents.
Do not use AC/In-Car Charger if the cord is damaged.
Fire or electric shock may be caused. Contact the SoftBank
Customer Assistance to replace the cord.
During thunderstorms:
Unplug Charger to avoid damage, fire, or electric shock.
Keep Charger out of the reach of children.
Electric shock or injury may result.