SoftBank 920SC User Manual page 305

Accept or reject calls from specified phone numbers
Create or edit Black List
Accept or reject calls from unknown numbers
Accept or reject calls when number is withheld
Accept or reject calls from payphones
Accept or reject calls when number is unavailable
Activate or cancel Offline mode
Show or hide your own number when placing calls
Set 920SC to automatically redial busy numbers
Activate or cancel automatic ringer reduction
12
Enable or disable calling via Stereo Earphone Microphone
12-24
Reject incoming calls → Reject list → On/Off → On or Off
o
Off When a call from Reject list arrives, a caller hears a busy tone and call is not connected. Rejected
●
appears in Standby. Press w (View) to check missed call.
Reject incoming calls → Reject list → Edit black list → o → Add → Direct input,
Phonebook, or Call log, and add an entry → w (Save)
To delete saved phone numbers, select Edit black list → highlight phone number → o →
●
Delete → Selected or All → Yes. When All is selected, enter Phone Password.
o
Off Reject incoming calls → Unknown → On or Off
o
Off Reject incoming calls → Withheld → On or Off
o
Off Reject incoming calls → Payphone → On or Off
o
Off Reject incoming calls → Unavailable → On or Off
o
Off Offline → On or Off
Show my number → On/Off → On or Off
To check current status, select Get status.
●
Auto redial → On or Off
On: 920SC automatically disconnects call and redials busy numbers. Auto redial repeats up to 10
●
times until o (Cancel) or y is pressed.
o
Off
Auto redial setting takes priority when Video Call retry setting is selected.
●
If called party uses Call Forwarding or Voice Mail, call is forwarded accordingly.
●
Ringtone reducer → On or Off
o
Off
When ringtone volume level is high, the volume level is reduced to Level 1 for the first two
●
seconds, then returns to the set level.
Earphone call → Earphone call activate → On or Off → Call number → Direct input,
Phonebook, or Call log, and add a phone number → w (Save)
o
Earphone call: Off On: Press Stereo Earphone Microphone switch for 1+ seconds to call specified number. To change
●
specified number, repeat setup operation, saving the new number.