Installation With Isofix Rigid Anchors - Toyota Kluger Owner's Manual

Installation with ISOFIX rigid anchors

Fold the seatback while pulling
1
the lever. Return the seatback
and secure it at the 1st lock
position (most upright position).
Move the seat as far back as
possible.
If your child restraint system inter-
feres with a head restraint and can-
not be installed properly, install the
child restraint system after remov-
ing the head restraint. (→P. 153)
Widen the gap between the seat cushion and seatback slightly.
2
Latch the buckles onto the
3
exclusive fixing bars.
If the child restraint has a upper
anchorage strap,
anchorage strap should be latched
onto the anchor fitting.
Run the upper anchorage strap
under the head restraint.
the upper
1-1. For safe use
61
1