Cancelation Procedure; Recalling The Driving Position Using The Memory Recall Function - Toyota Kluger Owner's Manual

■

Cancelation procedure

Carry only the key you want to cancel and then close the driver's
door.
If 2 or more keys are in the vehicle, the driving position cannot be
canceled properly.
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
While pressing the "SET" button, press and hold the door lock
3
switch (either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for
approximately 3 seconds.
■

Recalling the driving position using the memory recall function

●Different driving positions can be registered for each electronic key. There-
fore, the driving position that is recalled may be different depending on the
key being carried.
●If a door other than the driver's door is unlocked with the smart entry & start
system, the driving position cannot be recalled. In this case, press the driv-
ing position button which has been set.
■
Customization
The unlock door settings of the memory recall function can be customized.
(Customizable features: →P. 462)
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.
3-3. Adjusting the seats
151
3