Toyota Kluger Owner's Manual page 60

58
1-1. For safe use
While
5
restraint system down into
the rear seat, allow the
shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
Latch the hook of the upper
6
anchorage strap onto the
anchor fitting. (→P. 62)
Run the upper anchorage strap
under the head restraint.
Make sure the seat belt is tightly
secured, and that there is no
slack in the belt.
pushing the child