To Correctly Attach Child Restraint System To Isofix Rigid Anchors - Toyota IQ 2012 Owner's Manual

1-7. Safety information
CAUTION
 When installing a child restraint system
 When a junior seat is installed, always ensure that the shoulder belt is
positioned across the center of the child's shoulder. The belt should be
kept away from the child's neck, but not so that it could fall off the child's
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
 Ensure that the belt and tab are securely locked and the seat belt is not
twisted.
 Push and pull the child seat in different directions to be sure it is secure.
 Follow all installation instructions provided by the child restraint system
manufacturer.
 Always remove the locking clip when the child restraint system is not
installed.
 To correctly attach a child restraint system to the ISOFIX rigid anchors
When using the ISOFIX rigid anchors, be sure that there are no foreign
objects around the ISOFIX rigid anchors and that the seat belt is not caught
behind the child restraint. Make sure the child restraint system is securely
attached, or it may cause death or serious injury to the child or other passen-
gers in the event of a sudden stop, sudden swerve or an accident.
158
iQ_WE_74014E