Hpe Officeconnect 1920S Switch Series - HP OfficeConnect 1920S 8G Quick Start Quide

HPE OfficeConnect 1920S Switch Series

The switch drawings in this document are for illustration only and may not match your particular
switch model.
For more detailed instructions and information to set up your switch, view or download the Installation and
Getting Started Guide for your switch at http://www.hpe.com/support/hpesc.
NOTE:
The HPE OfficeConnect 1920S Switch Series 8-port, 24-port, and 48-port non-PoE+ models have a
fan-free design, making them quiet for office deployments. A warmer than normal enclosure is a
standard state of operation for a fan-free switch.
Although the top of the switch enclosure may feel warm to the touch, it has no effect on functionality
or performance of the product.
1. Unpack and check included parts.
2. Prepare for installation. To avoid personal injury or product damage, review the Safety
Precautions.
3. Power-on and verify that Self-Test completes normally.
For the 1920S-24G, 1920S-24G-PPoE+, 1920S-24G-PoE+, 1920S-48G, and 1920S-48G-PoE+
switches, first connect the power cord to the power connector at the back of the switch. Then, connect
the other end of the power cord into an electrical outlet. For the 1920S-8G and 1920S-8G-PoE+
switches, connect the AC/DC adapter power cord to the power connector at the back of the switch. Then
plug the AC/DC power adapter into an electrical outlet.
4. Mount the switch.
4 HPE OfficeConnect 1920S Switch Series
• Documentation kit
• Switch
• Accessory kit (installation hardware)
• AC power cord for HPE 1920S-24G,
1920S-24G-PPoE+, 1920S-24G-PoE+,
1920S-48G, and 1920S-48G-PPoE switch
models or DC external power adapter for
1920S-8G and 1920S-8G-PPoE+ switch models