Removing The Hard Disk Drive - Clevo N850HK1 Service Manual

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7mm
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Disassembly Process
1. Turn off the computer, and remove the battery
2. Remove the SD card cover
3. Carefully lift the bottom case
4. The HDD will be visible at point
a.
2
3
4
15
16
12
13
11
10
c.
20
(page 2 - 5).
and screws - (Figure 3a).
1 6 2 17
up from point and remove it
18 19
on the mainboard (Figure 3c
20
b.
6
5
17
7
14
1
8
9
18
(Figure 3b ) .
)
.
18
Removing the Hard Disk Drive 2 - 7
Disassembly
Figure 3
HDD Assembly
Removal
a. Remove the SD card
cover and screws.
b. Remove the bottom
case.
c. Locate the HDD.
19

20. Hard Disk
• 16 Screws