Telos Zephyr IPORT PLUS User Manual page 42

VMIX AND VMODE
Each VMix Sub submixer input includes an on/off setting, a gain setting, and automatic fade-up/fade-down time
parameters. Using one is easy; let's walk through the steps:
In the Src Name box, enter the name of the source you'll be assigning to the input.
♦
In the Channel box, enter the unique Livewire channel number of your audio source.
♦
In Stream Type will normally be set to "From Source", meaning that the source itself (a mic, CD player,
♦
etc.) will be providing the audio. However, you can select "To Source" to use the source's automatically
generated Backfeed (mix-minus audio) as in input.
Example: Selecting "From Source" when a phone hybrid is assigned as a VMix Sub input would use the caller audio; selecting
"To Source" would instead use the Mix Minus sent to the hybrid.
Select the Enable box next to the input to turn the Submixer input on.
♦
Leave the Fade Time boxes set at their default.
♦
The Fade Time function won't be used in normal operation, but can be used to create cross fades between
sources when Pathfinder is dynamically making changes to the VMix.
If, say, 1.0 is entered in the first box, the submixer channel's audio will rise from -∞ to the Gain value set in
the next field in 1.0 seconds. If the field is set to 0, the audio will simply turn on at the gain value specified.
The second box works the same way, but controls the ON to OFF fade time.
In the Gain box, enter the setting, in dB, that you want for the Submixer input. Each input has its own
♦
individual Gain setting.
That's all you need to do to configure a VMix Submixer input stream. You can configure up to 5 input
♦
streams per VMix Submixer.
At the bottom of each of the submix sections is an Apply button. Any changes you make will be saved
♦
when this button is pressed. Be sure to save the changes for each submixer as they are configured.
VMIx Submixer Advanced Options
There are some additional options provided for advanced users.
In most cases only the Submix output itself needs a unique channel number, but if you so desire, each VMix input
can also be sent back to the network as a unique source, post the ON/OFF and gain stage of the VMix. Some users
find this useful for constructing "cascaded" mix channels to suit unique situations. To do so, enter values for these
controls:
Out Name: The name you give the post-on/off submix channel to send back to the Axia network.
♦
Channel: the channel number you assign to the post-on/off submix channel to send back to the Axia
♦
network.
Out Stream Type. Choose from Live Stereo, Medium Stereo, Standard Stereo to enable the direct output
♦
stream for this VMix "fader". Disabled means no stream will be generated.
Be sure to click Apply after you've finished making any options changes.
SECTION 6 |
33