Table of Contents
Advertisement
AUDIO TRANSPORT VIA MPEG OR OPTIONAL APTX® ENHANCED
Codec Configuration
Global Codec Options
From the Codec Configuration page, click the Global Options button at the right top to set the parameters that are
common for all codec channels. Having done so, you will see this page:
"Unit Configuration" options determine whether iPort will operate with 16 bidirectional codecs, or 16 encoders
only, or 16 decoders only.
In the "Codec Receive Ports" section:
"Port number base" determines the receive port number assigned to the corresponding function of the
♦
first codec channel. Port numbers for other codec channels are incremented by one per channel.
"Mcast port" settings determine a single receive port number for all multicast traffic arriving over the
♦
path A or path B accordingly
The "Restore default port numbers" option will reset all port numbers to the factory default values
♦
The lower two sections of this page are used to configure the Content Delay function - see section 4 of this docu-
ment.
SECTION 2 |
14
Advertisement
Table of Contents
Need help?
Do you have a question about the Zephyr IPORT PLUS and is the answer not in the manual?
Questions and answers