Konica Minolta MAGICOLOR 3300 Service Manual page 51

Removal
1) Remove the CASSETTE of the TRAY 2. (RRP1.1)
2) Remove the COVER FRONT. (RRP1.1)
3) Remove the COVER R (PL15.2.2). (RRP1.2)
4) Remove the connector (J81) of the HARNESS ASSY PLG (PL15.5.2) from the connector (P81) on the
PWBA OPTFDR (PL15.5.1).
5) Remove the harness of HARNESS ASSY FDR2T2 (grey) (PL15.5.3). (RRP1.5)
6) Remove the connector (J84) of the DRIVE ASSY FEEDER SINGLE (PL15.5.5) from the connector
(P84) on the DRIVE ASSY OPF (PL15.5.1). (RRP1.7)
7) Remove 2 screws securing the PWBA OPTFDR (PL15.5.1) to the OPTION FEEDER frame.
8) Remove the PWBA OPTFDR (PL15.5.1).
Replacement
Replace the components in the reverse order of removal.
When replacing, align the hole on the board of the PWBA OPTFDR (PL15.5.1) and the
flap on the OPTION FEEDER frame (2 positions).
Chapter 3 Removal and Replacement Procedures
3-51