Konica Minolta MAGICOLOR 3300 Service Manual page 15

13) Parts which are always removed to check as indicated in the FIP and procedures for that purpose are
not specifically referred to here. They should be handled carefully.
14) "Replacement" in the FIP indicates replacement of parts which are considered to be the source of
trouble to be checked after replacing those parts, assemblies containing them, or parts (HIGH ASSY).
15) The FIP describes the first tray of optional FEEDER UNIT as "Tray 2", and the second tray as "Tray 3".
16) In the FIP, existence and non-existence of Diag tools (maintenance tools,) are distinguished in some
cases. Correct troubles according to the instructions in the FIP.
17) In the FIP, procedures are differentiated depending on specifications. Correct troubles according to
the instructions in the FIP.
18) For optional parts, some troubleshooting procedure may follow the manual for those options, of which
you should take note.
Keep those manuals for the optional parts when required.
Chapter 1 Troubleshooting
1-15