Konica Minolta MAGICOLOR 3300 Service Manual page 101
Hide thumbs
Also See for MAGICOLOR 3300:
- Service manual (518 pages) ,
- User manual (198 pages) ,
- Installation manual (39 pages)
Table of Contents
Advertisement
Removal
1)
Remove the SOLENOID FEED (PL15.4.17). (RRP3.1)
2)
Remove the SPRING FEED H (PL15.4.10). (RRP3.2)
3)
Remove the SPRING FEED 1 (PL15.4.9). (RRP3.3)
4)
Remove the GEAR FEED H2 (PL15.4.11). (RRP3.4)
5)
Remove the GEAR FEED 1 (PL15.4.8). (RRP3.5)
6)
Remove the GEAR FEED H1 (PL15.4.12). (RRP3.6)
7)
Remove the GEAR FEED 2 (PL15.4.13). (RRP3.7)
8)
Remove the STOPPER CLUTCH (PL15.4.16). (RRP3.8)
9)
Remove the CLUTCH ASSY TURN (PL15.4.18). (RRP3.9)
10) Remove the GEAR IDLER (PL15.4.15). (RRP3.10)
11) Remove the GEAR IDLER FEED (PL15.4.14). (RRP3.11)
12) Remove the GEAR IDLER IN (PL15.4.19). (RRP3.12)
13) Remove 3 E-rings securing the bearing (ø6×L8)/METAL (PL15.4.7) (3pcs) to the PICK UP ASSY.
14) Remove the BEARING (ø6×L8)/METAL (PL15.4.7) (3pcs).
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-101
Advertisement
Table of Contents
Troubleshooting
