Wiring Diagram Between Parts; Configuration; Notes On Using The Wiring Diagram Between Parts - Konica Minolta MAGICOLOR 3300 Service Manual

2. Wiring Diagram between Parts

2.1 Configuration

The wiring diagram is separated into 3 sections to show detailed connection between parts.
§ 1 Drive section
Connection between PWBA OPTFDR and PWBA HBN MCU
Connection between PWBA OPTFDR and DRIVE ASSY FEEDER SINGLE
§ 2 Cassette section 2
Connection between PWBA OPTFDR and SWITCH ASSY SIZE (Tray2)
Connection between PWBA OPTFDR and SENSOR PHOTO (No Paper Sensor2)
Connection between PWBA OPTFDR and SENSOR PHOTO (Low Paper Sensor2)
Connection between PWBA OPTFDR and SOLENOID FEED (Tray2)
Connection between PWBA OPTFDR and CLUTCH ASSY TURN (Tray2)
Connection between PWBA HBN MCU and PWBA OPTFDR

2.2 Notes on Using the Wiring Diagram between Parts

The following describes the legend of the wiring diagrams between parts shown on the following pages.
Symbols
PWBA
OPTFDR
7-142
Denotes a plug.
Denotes a jack.
P/J
XX
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
YY
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Chapter 5.
Parts List.
Heater
Denotes functional parts attached with functional parts name.
Description