Working With The Nano; Tree Structure; Main Navigation Screen Description - LXNAV NANO4 Manual

Version 1.05

5 Working with the NANO

5.1

Tree structure

4
The NANO has 5 modes, Info, Flarm (if Flarm is connected), Waypoint, Task and Setup
mode. Info mode has two subpages, where you will find all the necessary information about
the status of the NANO
Info
5.2

Main navigation screen description

The main navigation screen consists of a map with coloured Airspace, Waypoints with names
or Task (depends on which page you are looking at), Vario tape (optional) on the left and
status bar on the top.
The vario tape and vario dynamics can be configured in the Setup-Hardware-Vario menu. If
you don't want to see the vario tape, you can switch it off.
The status line indicates the status of the GPS, indicates the chosen waypoint that you are
navigating to, the status of the Bluetooth device, Battery level and time.
Menu buttons appears, when you press any one of the buttons. Each button has its own
function which is described on the button label. The functions of buttons are mostly related
to the page where you are (Waypoint, Task, Flarm, Info, Setup). If there is no label on the
button, this button has no function.
Battery level can be displayed in two ways, with the classic battery level indicator or round
progress with number inside, which indicates remaining hours. Outside progress indicates
percent of the battery level. When the remaining time is calculated to be less than 1 hour,
the indication becomes red and the inside number means remaining minutes, the outer ring
is progress for last hour (60 minutes).
4
4
.
Flarm Waypoint
Page 25 of 54
Task Setup
May 2017