Configure Nano; Directly On Nano; Pilot Information; Editing Navboxes - LXNAV NANO4 Manual

Version 1.05

7 Configure NANO

Flight declarations can be uploaded to the NANO
 Directly on the NANO
 Using the NanoConfig program on PC,
 Bluetooth (NanoConfig for Android, Oudie, XCSoar,..)
 Serial interface (PDAs, Oudie, XCSoar)
Declarations are stored in the SYSTEM folder in a file called decl. The declaration file is
formatted as a standard IGC header file. It is recommended that you do not try to modify
this file yourself.
7.1

Directly On NANO

7.1.1 Pilot information

Detailed information is written in Ch.5.8.1

7.1.2 Editing Navboxes

At the bottom of the map screen are four nav boxes, which can be chosen by user. With
long press on nav box, user can select by many nav box options.
Following nav boxes are available:
 Altitude
 Altitude in opposite unit (m<->ft)
 Arrival Altitude
 Arrival Altitude at Mc = 0 setting
 Bearing
 Distance
 Calculated final glide at choosen Mc
 Flight level
 Ground speed
 Height above ground
 Distance in opposite units (km<->nm)
 Required glide ratio to reach target at choosen Mc
 Required altitude to reach target at choosen Mc
 Task distance
 Task required glide ratio to reach task finish at choosen Mc
 Thermal vario
 Track
4
4
4
Page 44 of 54
4
in four different ways:
May 2017