Table of Contents
Advertisement
Rev #17
6.1.3 ADS-B firmware update via LXxxxx
If Power mouse is connected to LXxxxx via LX5PF cable connected o Port 2 on PowerMouse, firmware
update can be performed directly from LXxxxx. If LXxxxx has no built in Flarm, just enter password
89891 and select file with ADSB firmware App_FADS_X.XX.lxfw.
In case you have built in Flarm and connected external PowerMouse, before update procedure
described above, enter password 49147.
6.2 Configuring PowerMouse
6.2.1 Configuring PowerMouse settings with PowerFLARM config
PowerFlarm config is available at:
https://gliding.lxnav.com/lxdownloads/software/
Here you can set all settings for your PowerMouse device. File will be saved as flarmcfg.txt file,
which you should save on the USD memory stick. To load this file into PowerMouse, insert USB key
into USB slot on PowerMouse and switch on PowerMouse. File will be automatically loaded into
device.
Version 1.18
Page 16 of 22
November 2019
Advertisement
Table of Contents
