Key Click - Hammond XK-5 Quick Start Manual

5. Key Click

The XK 5’s “Virtual Multi Contact™” keying system provides the classic Hammond “Feel." On Vintage Hammonds,
the metal on metal contacts beneath each key yielded that unique, essential morsel of noise so beloved by all
who lay their hands on the King Of Instruments. Each one had their own voice. Here is how to dial in exactly how
much of this noble imperfection you desire.
The Key click Parameters are “Patch” Parameters, they are unique to each Patch. You will need to select the
Patch you wish to adjust the Key click on. If you are using the Adjust Presets, you will need to select either of
the UPPER ones, and pull the Drawbars to your liking. Play as you adjust to arrive at your desired sound.
Outside of the Adjust Presets, you will need to SAVE your edited Patch. The procedure for doing so is outlined
starting on page 29 of this Guide.
MENU* - For adjusting Key Click
*
1. Touch the DRAWBAR Touch Button to enter the DRAWBAR Edit Menu.
2. Make sure the value under “ENV” is “CON." If it isn’t, use the VALUE Rotary Knob to make it so. After it is,
proceed.
4. Touch the PAGE RIGHT Touch Button ONCE.
Play the XK 5 and, using the VALUE Rotary Knob, adjust the “T” Parameter to your taste. When satisfied, proceed.
6.Touch the PAGE RIGHT Touch Button ONCE
Play the XK 5 and, using the VALUE Rotary Knob, adjust the “D” Parameter to your taste.
Consult the Owner's Playing Guide for more details about this feature.
After you are satisfied, you can SAVE your settings into the selected Preset. See page 29 for instructions on how to
do this..
If you have an Adjust Preset ("A#" or "B") selected, touch the PLAY Touch Button to return to PLAY Mode and
proceed.
22