U.S. Products Cobra-H Operating Instructions Manual
  1. Manuals
  2. Brands
  3. U.S. Products Manuals
  4. Scrubber
  5. Cobra-H
  6. Operating instructions manual

U.S. Products Cobra-H Operating Instructions Manual

240v
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

COBRA
-H
®
EXTRACTOR
240V
INFORMATION
&
OPERATING
INSTRUCTIONS
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE
READ ALL SECTIONS OF THIS INSTRUCTION MANUAL
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Keep machine from rain and snow, extremes in temperatures, and store in a
heated location. Use the machine indoors. Do not use outdoors.
3. Do not let the pump run dry.
4. Use approved chemicals only. NO SOLVENTS.
5. Wear gloves or use rags when removing quick disconnects to prevent burns.
6. Never use water above
/130 °F in the solution tank.
54 °C
3/10 revised 10/10 FORM NO. 56041899

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cobra-H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for U.S. Products Cobra-H

Summary of Contents for U.S. Products Cobra-H

  • Page 1 COBRA ® EXTRACTOR 240V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage. 2. Keep machine from rain and snow, extremes in temperatures, and store in a heated location.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine.

  • Page 3: Cleaning Solutions

    INSPECTION: Carefully unpack and inspect your COBRA-H for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the...

  • Page 4: Switch Plate

    SWITCH PLATE PUMP VACUUM (1), VACUUM (2), AND PUMP (3) SWITCHES: These switches are all powered by cord #1. Switches are on when illuminated. COBRA-H SWITCH PLATE LID (RECOVERY TANK) HOLDING TANK LID VAC INTAKE LATCH (2) WHEEL DRAIN VALVE...

  • Page 5: Setup And Operation

    SET-UP and OPERATION: Fill the holding tank with clear water and the detergent of your choice. Mix well. Although this machine is designed to supply instant hot water, the addition of warm or hot water to the holding tank would be a plus factor. Never put water hotter than 54 °C/130 °F in the tank.
  • Page 6 FORM NO. 56041899 - 6...

  • Page 7: Parts List

    COBRA-H 240V PARTS LIST ITEM No PART No DESCRIPTION ITEM No PART No DESCRIPTION Washer, Fiber Drain Gate (See Misc.)* 116A Bushing, Fiber Screw, 8-32 X 5/8”, S/S Washer, Brass Latch Louver, 3” (includes screws) O-Ring, Small 909A Latch Strike, for Latch, S/S...
  • Page 8 425-322-0133 / 800-257-7982 / FAX: 425-322-0136 11015 - 47th Ave. W. / Mukilteo, WA 98275 VISIT US AT: http://www.usproducts.com...

Table of Contents