Cleaning The Mighty Cooling Unit; Removal Of The Lower Filling Chamber Screen - Storz & Bickel GMBH MIGHTY Instructions For Use Manual

10. DISASSEMBLING, CLEANING AND ASSEMBLING
10.2. Cleaning the MIGHTY Cooling
Unit
The Cooling Unit can be disassem-
bled for cleaning purposes and then
assembled again (see Chapter 10.1.
"Disassembling and Reassembling
the MIGHTY Cooling Unit", page
24).
The Cleaning Brush, cotton swabs
and paper or cotton towels may be
used for cleaning. As solvent, we rec-
ommend alcohol (ethanol) or warm
water with wash-up liquid.
For optimal airflow, please ensure
the Cooling Unit and Mouthpiece are
clean and free from debris blockage.
Manual cleaning of the disassembled
Cooling Unit
Do not immerse any plastic
components in alcohol or eth-
anol for longer than an hour.
Extended contact with alcohol or eth-
anol can lead to discoloration or em-
brittlement of plastic parts.
Before assembling allow all compo-
nent parts to dry properly.
After cleaning, check all component
parts for surface damage, tears, sof-
tening or hardening, impurities, dis-
tortion and discoloration and set dam-
aged component parts aside.
Warning! Alcohol (ethanol)
is flammable and may easi-
ly ignite.
Sets of new Cooling Units
may be ordered from www.
storz-bickel.com.
10.3. Removal of the Lower Filling
Chamber Screen
Remove the lower Filling Chamber
Screen out of the Filling Chamber by
using a pair of tweezers or a pair of
pointed pliers. Insert a new Screen
while taking care that the edges of the
Screen seat into the groove at the bot-
tom of the Filling Chamber.
26
11. ACCESSORIES
11.1. Dosing Capsules and Magazin
Dosing Capsules with Magazine
With the Dosing Capsules, which are
available as accessories, you can fill
ground plant material or aromatic oils
using the Liquid Pads into the Dosing
Capsules in advance and store them
in the Magazine. This facilitates the
handling.
Filling the Dosing Capsules with
ground Plant Material
The plant material has to be ground
with the included Herb Mill first.
The Dosing Capsules can be filled
with ground plant material per Cap-
sule and be stored in the Magazine as
a reserve.
Dosing Capsule with removed cap
Grind the plant material and fill the
Dosing Capsule by using the Maga-
zine Cap (funnel).
Dosing Capsule while being filled with
Magazin Cap (funnel)
Attach the cap onto the Dosing Cap-
sule. Repeat the filling process until
the desired amount of Dosing Cap-
sules is filled and insert them into the
Magazine. The Magazine can hold up
to 8 Dosing Capsules.
27