11
SERVICE WORK ON THE CHASSIS
11.17
Installing the front fender
11.18
Removing the shock absorber
11.19
Installing the shock absorber
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Screw, front fender
C00641-11
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Detach brake line
–
Remove screw
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
absorber.
E00215-10
Main work
–
Push splash protector
and tighten screw
Guideline
Screw, top shock
absorber
–
Mount and tighten screw
Guideline
E00215-11
Screw, bottom shock
absorber
–
Attach brake line
Finishing work
–
Remove the motorcycle from the lift stand. (
p. 39)
from the brake line guide.
and lower the rear wheel with the swingarm as far as possible
, push splash protector
to the side and position the shock absorber. Mount
.
M12
.
M12
.
and
.
M6
10 Nm (7.4 lbf ft)
p. 32)
to the side, and remove the shock
60 Nm
Loctite
(44.3 lbf ft)
60 Nm
Loctite
(44.3 lbf ft)
p. 32)
40
®
2701™
®
2701™