Checking The Basic Setting Of The Fork; Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - Husqvarna TC 85 2017 Owner's Manual

10 TUNING THE CHASSIS
10.11

Checking the basic setting of the fork

Info
For various reasons, no exact riding sag can be determined for the forks.
10.12

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
10.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
–
Check the riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
–
As with the shock absorber, smaller differences in the rider's weight can be com-
pensated by the spring preload.
–
However, if the fork is often overloaded (hard end stop on compression), harder
springs must be fit to avoid damage to the fork and frame.
401000-01
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
402496-10
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Mount protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
C00629-10
p. 28)

.

clockwise all the way.

are located at the bottom end of the fork legs.
18 clicks
15 clicks
12 clicks

.
 clockwise all the way.

are located at the top end of the fork legs.
30
p. 27)