Removal Procedure - Gree GJC09AF-E6RNB3A Service Manual

Service Manual

11.Removal Procedure

Step
1. Remove panel assy
Open the air-inlet panel; remove the
filter; remove the screws in the middle,
at the left side and right side of the
panel; beat the clasp of cabinet slightly
and then remove the panel.
2. Remove cabinet
Loosen the clasp fixing chassis;remove
the screws fixing the rear part of cabinet
and then pull out the unit.
Installation and Maintenance
Caution: pull out the power,discharge the
refrigerant completely before removal.
Procedure
Air-inlet
panel
Filter
Chassis Clamp
Screw
37