Step
7. Remove evaporator
Unsolder each connection pipe
(Note:discharge the refrigerant
completely before unsoldering).
Remove the screws fixing evaporator
and then remove the evaporator.
8. Remove condenser
Unsolder each connection pipe
(Note:discharge the refrigerant
completely before unsoldering).
Remove the screws fixing condenser
and then remove the condenser.
9. Remove axial flow blade
Remove the nuts of axial flow blade;
remove the washer and then remove
the axial flow blade.
40
Procedure
Evaporator
Screws
Screws
Condenser
Screws
Nut
Axial flow blade
Installation and Maintenance
Service Manual