Connecting Wires - wattstopper DT-300 Installation Instructions Manual

CONNECTING WIRES

• Care should be taken to separate high voltage power from low voltage (Class 2)
control wiring.
• All connections to sensor are low voltage, Class 2.
Line Voltage
Wire Color Legend
Red
Black
White
Power Pack
Low Voltage
Class 2
Ceiling
Depluggable
Terminal
Spring Clips (2)
Rear Housing
Front Cover
Standard wiring with local off switch
Call 800.879.8585 for Technical Support
Line
Neutral
Black
Common
Blue
Red
Control Out
+24V
DT-300
Feed Through
Load #1
Load #2
(Optional)
Line
Voltage
#1 #2
Line Voltage
Switches