Table of Contents
Advertisement
Quick Links
Specifications
Voltages:
PW-103N ..............................................120/277VAC, 50/60Hz
Load Limits:
@120VAC ........................ 0-800W tungsten or ballast, 1/6 HP
@277VAC ....................................................... 0-1200W ballast
Load Type Compatibility:
Incandescent, fluorescent, magnetic or electronic ballast
Horsepower Rating ......................................1/6 HP @120VAC
Time Delay Adjustment .......................................5 to 30 minutes
Walk-Through Mode .....3 minutes if no activity after 30 sec.
Test Mode ............ 5 sec. for 10 min. with DIP switch setting
PIR Adjustment.................................... High or Low (DIP switch)
Light Level Adjustment ........................................... 8fc to 180+fc
Alerts
...........................................Selectable Audible & Visual
Passive Infrared Multi-Way
Wall Switch Occupancy Sensor
PW-103N
US Patents: 5640113, 6617560, 6888323
PW-103N
7122976, 7436132, 8067906
Santa Clara, CA 95050
800.879.8585
v3
Advertisement
Table of Contents
Related Manuals for wattstopper PW-103N
Summary of Contents for wattstopper PW-103N
- Page 1 PW-103N Passive Infrared Multi-Way Wall Switch Occupancy Sensor PW-103N Specifications Voltages: PW-103N ..........120/277VAC, 50/60Hz Load Limits: @120VAC ......0-800W tungsten or ballast, 1/6 HP @277VAC ............0-1200W ballast Load Type Compatibility: Incandescent, fluorescent, magnetic or electronic ballast Horsepower Rating ........1/6 HP @120VAC Time Delay Adjustment ........5 to 30 minutes...
-
Page 2: Unit Description And Operation
The nightlight feature can be disabled if not desired. See Nightlight section. Up to four PW-103N sensors can be connected to the same circuit. Pressing the ON/OFF button on any PW in the circuit toggles the load ON or OFF. -
Page 3: Walk-Through
Walk-Through The Walk-Through mode shortens the time delay to reduce the amount of time the load is ON after a brief moment of occupancy, such as returning to an office to pick up a forgotten item then immediately exiting. The PW sensor turns the load OFF three minutes after Walk-Through the area is initially occupied, if no motion is detected Mode... - Page 4 ON the load. Nightlight Options The PW-103N is equipped with a field selectable nightlight. A separate automatic light level sensor governs operation of the nightlight. You can set the nightlight for one of three colors: amber (default), white or blue. You can also select from two brightness levels, high or low.
-
Page 5: Coverage Patterns
COVERAGE PATTERNS Coverage testing has been performed according to the NEMA WD 7 guideline. For best performance, use in spaces not larger than 15’ x 12’. PIR Sensor The sensor has a two-tiered, multi-cell viewing Fresnel lens with 180 degree field of view. -
Page 6: Installation
Caution: Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the unit and the electrical service panel. Visit our website for FAQs: www.wattstopper.com... -
Page 7: Dip Switch Settings
DIP SWITCH SETTINGS On Mode Time Visible Nightlight Delay Alerts 1 2 3 Time Delay Test 5 minutes Audible Alert Enabled 10 minutes 15 minutes Disabled Walk-Through Audible Alerts PIR Sensitivity 20 minutes 25 minutes PIR Sensitivity On Mode 30 minutes Low, 50% Manual On Service... -
Page 8: Sensor Adjustment
Presentation Mode is a feature of the Auto ON mode. When the relay is manually turned OFF the PW holds the lights OFF until no motion has been detected for the duration of the Time Delay. With subsequent occupancy, the PW turns the load ON. Visit our website for FAQs: www.wattstopper.com... -
Page 9: Troubleshooting
TROUBLESHOOTING Lights do not turn ON with motion (LED does flash) 1. Press and release the ON/OFF button to make sure that the correct lights come ON. - If the lights do NOT turn ON, check wire connections, especially the Load connection. - If the lights turn ON, verify that the correct On Mode is selected in DIP switch 8. -
Page 10: Cover Plates
White (-W), Light Almond (-LA), Ivory (-I), Grey (-G), Black (-B). Warranty Information WattStopper warranties its products to be free of defects in materials and workmanship for a period of five years. There are no obligations or liabilities on the part of WattStopperfor consequential damages arising out of or in...