Self-Diagnosis - Sony BVP-900P Maintenance Manual

2-4. Self-Diagnosis

2-4. Self-Diagnosis
The DIAGNOSIS page of the OPERATION menu is used for self-diagnosis of every plug-in board and
the OHB. The OPERATION menu appears on the viewfinder screen. By changing an internal switch on
the MS-57 board, the same signal as output to the viewfinder is enabled to be output at the TEST OUT
connector.
Equipment required
CCD unit
Camera control unit
Electronic viewfinder
Switches and control knob
Operational procedures
1. Change the DISPLAY switch from OFF to MENU. The OPERATION menu is displayed.
2. Turn the MENU SELECT control to move the → cursor to DIAGNOSIS.
3. Set the MENU SELECT switch to ENTER.
4. The menu page is returned to the previous page when the MENU SELECT switch is pressed to
CANCEL.
5. To cancel the menu operation, set the DISPLAY switch to OFF.
2-4 (E)
OHB-730/730P/730WS/730WSP/750A/750AP/750WSA/750WSAP
CCU-700/700P/700A/700AP
BVF-77/77CE/7700/7700P (or B/W monitor)
R G B
POWER
H-POSI V-POSI
FILTER LOCAL 3 4
2
1 5
ND
STORE
WIDTH HEIGHT
B C D
A E
CC
CENTER SAFETY
UP TALLY MIX VF DISPLAY
MARKER ZONE
MENU SELECT
ON ON ON
ON ON
OFF
CANCEL ENTER
OFF OFF OFF MENU
OFF
MENU SELECT switch
DISPLAY switch
RET RET 1
RETURN
SELECT 2
2 3
1
4
CURSOR
1 2 3
ON
VF DETAIL Pin P
ON POSITION
OFF CALL
OFF MENU
MENU SELECT control
BVP-900 P1