Audit (Audit Counters); Sleep (Sleep Mode) - Avery Weigh-Tronix E1010 Manual

This completes the TEST menu item. Press the SELECT key to go to TEST, then press
the UNITS key to go to the AUDIT submenu or press ESC to return to normal weighing
mode.

7.2.5 AUDIT (Audit counters)

The next section of the Supervisor menu is the AUDIT submenu. This menu lets you
view configuration and calibration audit counters. These counters cannot be changed,
only viewed. They are a record of configurations and calibrations performed on the
indicator.
Follow these steps to access each item in the AUDIT submenu:
CFG (Configuration audit counter)
1.
2.
CAL (Calibration audit counter)
3.
4.
5.

7.2.6 SLEEP (Sleep mode)

1.
When the indicator goes to sleep you must press the ON/OFF switch to restart the
indicator.
Any motion or any key press restarts the sleep timer.
Model E1010 Indicator User Instructions
With AUDIT displayed, press the PRINT key...
CFG is displayed. This stands for the Configuration audit counter. Use
this item to see how many times this indicator has been configured.
Press the PRINT key...
A number is briefly displayed, then CFG is displayed. This is the number
of times this indicator has been configured.
Press the UNITS key...
CAL is displayed. This stands for the Calibration audit counter. Use this
item to see how many times this indicator has been calibrated.
Press the PRINT key...
A number is briefly displayed, then CAL is displayed. This is the number
of times this indicator has been calibrated.
Press the SELECT key...
AUDIT is displayed.
Press the UNITS key...
SLEEP is displayed. This stands for the sleep mode timer.
29