Audit (Audit Counters) Menu - Avery Weigh-Tronix 1080 User Instructions

42.
43.
44.
This completes the tESt submenu. Press the SELECT key until tESt is displayed and
then press the UNITS key to go to the Audit submenu
To return to normal weighing mode, press ZERO. If you press ZERO you will be
prompted to save any changes made. Press ZERO to abort any changes or press the
F1 key to save changes.

7.2.5 AUDIT (Audit counters) menu

The next section of the Supervisor menu is the AUDIT submenu. This menu lets you
view configuration and calibration audit counters. These counters cannot be changed,
only viewed.
Follow these steps to access each item in the AUDIT submenu:
CFG (Configuration audit counter)
1.
2.
3.
CAL (Calibration audit counter)
4.
5.
6.
1080 Indicator User Instructions
Press the PRINT key...
nEt 1 is displayed.
Toggle between nEt 1 or nEt 2 using the TARE or UNITS key and press PRINT
when the network you want to view is displayed.
The first screen of network configuration information is displayed.
Repeatedly press the PRINT key to view all the configuration information. The
display will return to nEt 1 or nEt 2 when you've seen all the information.
From the tESt display, press the UNITS key...
Audit is displayed.
Press the PRINT key...
CFG is displayed. This stands for the Configuration audit counter. Use
this item to see how many times this indicator has been configured.
Press the PRINT key...
A number is briefly displayed, then CFG is displayed. This is the number
of times this indicator has been configured.
From the CFG display, press the UNITS key...
CAL is displayed. This stands for the Calibration audit counter. Use this
item to see how many times this indicator has been calibrated.
Press the PRINT key...
A number is briefly displayed, then CAL is displayed. This is the number
of times this indicator has been calibrated.
Press the SELECT key...
Audit is displayed.
7.2 Supervisor Menu
65