Table of Contents
Advertisement
エラー! スタイルが定義されていません。
Power Save Control
When the main switch is turned on, the machine turns on the fusing lamp. For
printing, the machine raises the fusing temperature to 175°C. The fusing
PRINTER MODEL-L1
temperature is kept at 175°C during printing.
175°C
Stand-by
SERVICE MANUAL
TECHNICAL DOCUMENT
When the power saver timer expires, the machine automatically goes into energy
saver mode.
Power saver timer
t1 = ? minutes.
• After time interval t1 passes following printing, copying, scanning, or key-
in [A], the LCD and all LED's go off.
t1 + t2 = ? minutes or ? minutes (selectable)
• The default value is ? minutes. (Economy Mode)
• Pressing the Clear Modes key for more than one second will change this
condition.
• When the Economy Mode LED is lit, t1 + t2 = ? minutes.
• When the Economy Mode LED is not lit, t1 + t2 = ? minutes.
[A]
[t1]
（
G191
1-18
i
PRINTER 3000 304 995 - 01
6 September 2005
[t2]
）
G182D013.WMF
t
Advertisement
Table of Contents
