Instrument Compatibility - Fluke i1000s User Manual

i1000s
Users Manual










The i1000s complies with IEC Publication 61010-2-032. Follow all warnings
to ensure safe operation.
Use of this equipment in a manner not specified herein may impair the
protection provided by the equipment.

Instrument Compatibility

The i1000s is compatible with any oscilloscope that accepts a standard
BNC connector and has an input impedance of greater than or equal to 1 MΩ
in parallel with a maximum of 47 pF. To achieve the stated accuracy, use the
i1000s with an oscilloscope having an accuracy of ± 2 % or better. The i1000s
may be used with digital multimeters (DMMs) if a BNC to banana jack adapter
is used.
4
for Power Metering products online at:
Table 1. Symbols
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
WARNING - RISK OF DANGER. Consult user documentation.
Application around and removal from uninsulated hazardous live
conductors is permitted.
Double Insulated
Conforms to European Union directives.
Certified by Underwriters Laboratories to North American safety
standards.
Measurement Category III is applicable to test and measuring
circuits connected to the distribution part of the building's low-
voltage MAINS installation.
Earth
AC (Alternating Current)
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not
discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types
in the WEEE Directive Annex I, this product is classed as
category 9 "Monitoring and Control Instrumentation" product. Do
not dispose of this product as unsorted municipal waste.
www.
PowerMeterStore
1.800.561.8187
.ca