Table of Contents
Advertisement
Before You Begin
Port
FE 0 - FE 1
AUX
Console
DC power
Front Panel LEDs
The SR1001 front-panel LEDs indicate real-time unit status.
LEDs
on page 22 provides information about how to interpret the LED states. For more
detailed LED information and troubleshooting tips, refer to the SR1001 Installation Guide.
Table 2: SR1001 Front Panel LEDs
LED
WAN Status
Ethernet 0/1
Link/Act
HS
Dup
Power
SR1001S Components
The SR1001S is the same as the SR1001 except the SR1001S supports a serial interface
instead of T1/E1. For more information on the SR1001 and SR1001S, refer to the SR1001
Installation Guide.
22
Avaya Secure Router 1000 Series Quick Start Guide
Ethernet LAN connection ports. These ports accept cables with RJ-45
cable connectors.
Reverse telnet connection. This port accepts a cable with an RJ-45 cable
connector.
Console management port. This port accepts a cable with an RJ-45 cable
connector.
12 VDC power connection. This port accepts the 2 mm power connector
on the power supply cable that ships with the router.
Description
Indicates traffic activity on this
interface
Indicates traffic activity on this
interface
Indicates traffic speed on the
interface
Indicates the type of duplex mode
Indicates router power status
Comments? infodev@avaya.com
Description
Table 2: SR1001 Front Panel
Color
Green = normal activity Red =
alarm state Yellow = test mode
Green = link is operational Blinking
Yellow = either receiving or sending
traffic Red = packet collisions
Off = 10 Mbps Green = 100 Mbps
Off = Half duplex Green = Full
duplex
Off = power off Green = power on
June 2012
Advertisement
Table of Contents
