Tools Required - Avaya SR1004 Quick Start Manual

Before You Begin
Additional Cables
The following additional cables are required for installing the SR1000.
Figure 4: Additional Cables Required
If you are installing the Secure Router 1001 Serial (1001S), you will also need a serial cable,
which can be one of the following types:
• V.35
• X.21
• RS-232
• RS-449
• EIA-530
• EIA-530A

Tools Required

The following tools are required for installing the SR1000.
Figure 5: Tools Required for Installation
Installation Site
The SR1000 is designed to be installed in an equipment rack; on a vertical surface; or on a
flat, stable surface. The installation site should provide ample room for connecting cables, allow
ventilation, and should not be subject to extreme temperature shifts. The Secure Router should
be located in close proximity to all relevant telecommunication ports.
20 Avaya Secure Router 1000 Series Quick Start Guide
Comments? infodev@avaya.com
June 2012