279 FC
Users Manual
2.
Press to activate the radio on the Multimeter. shows
on the display.
3.
On your smartphone, go to Settings > Bluetooth.
Verify that Bluetooth is turned on.
4.
Go to the Fluke Connect App and in the list of connected
Fluke tools, select 279 FC.
You can now take, save, and share measurements with the
app.
To send an IR Camera image to the app, see page 16.
6
Before You Start
This section is information to know before you use the
Multimeter.
XW
To prevent possible electrical shock, fire, or
personal injury:
•
Disconnect power and discharge all high-
voltage capacitors before you measure
resistance, continuity, capacitance, or a diode
junction.
Do not use the HOLD function to measure
•
unknown potentials. When HOLD is turned on,
the display does not change when a different
potential is measured.
Warning