1.
General Outlines
1- 1.Product Outlines
SK1-21(2-inch) & SK1-31(3-inch) are open frame printers equipped with Serial (RS232C) and
USB interface. Super-compact design and ruburst body make it possible for installing limited space
enclosures under wide range of operating environment. The reliable SK1 printers performimg
for versatile functions are ideal for a wide variety of kiosk systems.
1- 2.Features
■
Small and Ultra-Light Weight, Designed for wide variety of systems and equipments
Max 200mm/sec high-speed printing
■
■
Variety of paper core holders (adjustable for half inch and 1-inch inner core roll)
■
1D and 2D (Option) Barcode printing
■
Max φ120mm paper roll as standard
■
Various Sensors built-in : Paper near end, Paper empty, Head open sensor, Black-Mark sensor
(Option), Gap sensor (Option)
Wide variety of paper size (58, 60, 80, 83mm)
■
■
Autoloading function
■
Selectable for Partial cut or Full cut
■
Versatile operating environment
■
Available for Windows driver,Utility Driver and Linux driver
Available for Remote Status Monitor
■
<Other functions>
Capable of HEX dump printing and self test printing.
Various settings of characters, such as enlarged and upside down characters
Adjustable for printing line space.
Graphic printing by bit image.
Downloaded characters and user-defined characters can be printed.
Adjustable for paper feed amount.
With Ruled Line command, table layouts can be easily printed.
Page Mode allows erect/inverse images, clockwise 90 degrees/counterclockwise 90
degrees and overlapping printing.
Page Mode allows setting the paper length to a maximum of 250mm.
Using the Image Registration command, the printing layout can be set up beforehand.
With the Printing Density command, the printing density can be changed.
The command system conforms to ESC/POS
Capable of registering print images in internal flash memory.
SK1-21A/31A
.
TM
8