Command Systems; 10- 1．Command Table - SANEI ELECTRIC SK1-21A Technical Manual

10．Command systems
Command systems are compatible with ESC/POS.
The details please refer to separate volume "command reference".
10- 1．Command table
1. Paper feed command
Command Standard mode
CR Carriage return / Line feed
LF Carriage return / Line feed
FF Page length printing
ESC C Set the page length
ESC J Printing and feed forward
ESC j Printing and back feed
ESC d Printing and consecutive line feed
2．Tab command
Command Standard mode
HT Horizontal tab
ESC D Set horizontal tab
3．Format command
Command Standard mode
ESC 2 Set the initial linefeed value
ESC 3 Set the linefeed value
ESC SP Set the right margin
GS L Set the left margin
GS W Set the printing area width
ESC $ Set absolute position of the
Printing area
ESC a Align the position
4．Character modification command
Command Standard mode
ESC ! Modify character specifications in a batch
ESC G Specify the bold character / cancel
ESC E
ESC { Specify inverse printing / cancel
ESC - Specify underline / cancel
GS ! Set a character size
GS B Specify the black and white reverse character / cancel
GS b Specify and Cancel a smoothing font
5．Character Selection Command
Command Standard mode
ESC M Choose a character font
ESC R Choose an international character
ESC t Choose the character code table
ESC & Register a download character
ESC ? Erase a download character
ESC % Specify and cancel a download character
SK1-21A/31A
Page mode
Retrieve page memory / Carriage return
Retrieve page memory / Carriage return
Printing in page mode and returning to
standard mode
（Setting only）
Move Y axis in the forward direction
Move Y axis in the backward direction
Consecutive line feed
Page mode
Page mode
（Setting only）
（Setting only）
（Setting only）
Page mode
Specify inverse printing / cancel
Page mode
５１