2- 6．Changing 1-Inch Core Adapter; 2- 7．Adjust The Paper Position - SANEI ELECTRIC SK1-21A Technical Manual

2- 6．Changing 1-inch core adapter
1. How to change 1-inch core adapter
Roll paper can be replaced by changing from standard φ12mm to φ25.4mm.
1-1. How to attach the the attachment holders
Mount attachment holders to mounting holes.
1-2. How to detatch attachment holder
Clip the attachment holder and pull away in the direction of an arrow below.
2- 7．Adjust the paper position
1. How to change the position of Holder arm.
Three types of roll paper (φ120mm, φ102mm, φ83mm in diameter) is available by setting positoin of
holder arms.
1-1. How to setting
Detach polyslider and pull out shaft, and then detach holder arm.
Next, put a spring on a projection and set the holder arm on the spring.
Finally, put the shatf and fix it by the polyslider.
SK1-21A/31A
Mounting holes
1-inch core
adapter
1-inch core
adapter
Pull away from the
Attachment holder.
Push and attach
１６