4- 2．Hex Dump Mode; 4- 3．Function Setting Mode - SANEI ELECTRIC SK1-21A Technical Manual

4- 2．HEX Dump mode
Data entered from the computer is printed in hexadecimal numbers and characters.
● Printing method
① With pressing the SELECT button, turn on the power switch.
② When the LED lights up and printer starts printing, release the SELECT button.
③ After printing the following "HEX DUMP MODE", starts Hexadecimal mode.
④ Prints hexadecimal numbers and characters entered from the host system.
⑤ Press the power switch to cancel the HEX dump mode.
［Example］
4- 3．Function setting mode
There is a function setting mode to switch register functions in the memory manually.
Functions are called up by the SELECT and FEED buttons and the printer prints registered
functions.
(1) About memory switching
The memory switch is classified as follows.
① COMMON SETTING：
② INTERFACE SETTING：
(2) Function setting method
1. While pressing the FEED/SELECT button, turn ON the power switch.
2. When the LED lights up and printing starts, release the button.
3. The printer prints out the current setting mode and returns to that function setting.
4. To change the current function setting, press the feed button.
5. Refer to setting flow chart in "Setting of memory switch."
SK1-21A/31A
Common functions
Basic interface functions
３０