(3) The other specification
Specifications
Paper feedd calibration
Cutting
Waiting for
removing paper
6- 3.Stock space and Exit space
※1. Allow stock space for paper roll in accordance with the paper length of printing.
The hight of stock space is to be more than 1/2 of the paper length.
※2. For retraction of printed papers, place the retraction box at the exit of printed papers.
The box height is to be 1.5 times more than the paper length.
SK1-21A/31A
When receipt length is less than 50mm. Cutting is worked with
calibrating automatically to length more than 50mm.
Cutting is operated by changing partial-cut to full-cut.
After cutting, issuing is stopped until paper is removed.
Status of paper can be read by a status command.
Contents
40