2- 4．Setting Paper Roll - SANEI ELECTRIC SK1-21A Technical Manual

2- 4．Setting Paper Roll
① Set a roll paper to paper holder.
Widening one side of paper holder and putting in the roll paper. Then setting the paper to
holder.
② Use head open lever
Press the head open lever to lift the head unit as shown in below.
Set the paper pulling out the paper end straightforward and close the head unit.
2. Auto-loading system
The paper is passed through thermal head as following, paper is set to feed automatically
when the paper-empty sensor detects the paper.
SK1-21A/31A
１４