Adjustment; Removing The Fabric; Maintenance (Cleaning The Units And Disposing Of Waste Ink) - Ricoh Ri 3000 Safety Information And Quick Installation Manual

Direct to garment printers
Hide thumbs Also See for Ri 3000:
Table of Contents

Advertisement

Adjustment

When moving the Print Table, be careful so that your hands or fingers are caught with it. Otherwise, injury
may result.
When adjusting the machine feet to level the machine, be careful so that your hand is not caught between
the machine foot and stand. If it is caught, injury may result.

Removing the Fabric

When removing the fabric, be careful so that your hand or any other part of your body does not come in
contact with ink. If your skin comes in contact with ink, wash the affected area thoroughly with soap and
water. If your clothing comes into contact with ink, wash the stained area with cold water.

Maintenance (Cleaning the Units and Disposing of Waste Ink)

When maintenance is performed, the carriage may move while the top cover is open. Do not touch the
carriage while it is moving. Touching it may result in injury.
Be sure to wear commercially available goggles and gloves when performing the following maintenance:
Cleaning the Maintenance Station and nozzle plates
Cleaning and replacing the wiper blade
Cleaning the left and right ink drip foam trays
Replacing the drip pan foam
Disposing of the waste ink (in the waste ink tank and auxiliary waste ink tank)
Cartridge replacement
Follow the procedures in the user's manual for maintenance and securely install parts and covers. Failure
to do reliable work may cause injury or malfunction.
When using a flat head screwdriver, be careful so that the tip of the flat head screwdriver does not hurt
you.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ri 6000

Table of Contents