Calibration - Lutron Electronics SL-4023SD Operation Manual

Each digit indicates the following status :
D15 Start Word
D14 4
D13 When send the upper display data = 1
When send the lower display data = 2
D12, D11 Annunciator for Display
dB = 17
D10 Polarity
0 = Positive 1 = Negative
D9 Decimal Point(DP), position from right to the
left
0 = No DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP
D8 to D1 Display reading, D1 = LSD, D8 = MSD
For example :
D0 End Word
RS232 FORMAT : 9600, N, 8, 1
Baud rate
Parity
Data bit no.
Stop bit

11. CALIBRATION

1) Prepare the optional " SOUND CALIBRATOR ", such as
" SC-941 " or " SC-942 " ( set range to 94.0 dB ). Power
on the Sound Calibrator & plug calibrator output socket
into the " Microphone " head ( 3-9, Fig. 1 ) of the
Sound Level meter.
2) Select manual range to " 50 - 100 dB ".
3) Select " Time Weighting " at " Fast " position.
If the display reading is 1234, then D8 to
D1 is : 00001234
9600
No parity
8 Data bits
1 Stop bit
21