Siemens RUGGEDCOM i803 Installation Manual page 20

Chapter 2
Installing the Device
Figure 7: Inserting/Removing a MicroSD/MicroSDHC Card
1. Retention Screw 2. Access Plate 3. MicroSD/MicroSDHC Card
3. Without touching the contacts on the card, insert or remove the microSD/microSDHC card.
4. Install the access plate and finger-tighten the retention screw.
5. Power up the device.
12
1 2 3
Inserting/Removing the MicroSD/MicroSDHC Card
RUGGEDCOM i803
Installation Guide