Siemens RUGGEDCOM i803 Installation Manual page 11

RUGGEDCOM i803
Installation Guide
Power Supply Terminal Block
POWER LEDs
ALARM LED
Communication Ports
Access Plate
RS-232 Console Port
Description
• Section 4.3, "Failsafe Alarm Relay Specifications"
A pluggable terminal block. For more information, refer to:
• Section 2.5, "Connecting Power"
• Section 4.1, "Power Supply Specifications"
Illuminate when power is being supplied to the device by the respective power source.
Color
Green
Red
Off
Illuminates when an alarm condition exists.
Receive and transmit data, as well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available for the RUGGEDCOM i803, refer to
Chapter 3, Communication Ports.
The removable access plate provides access to the microSD/microSDHC slot. Use a microSD/
microSDHC card to load/store the firmware and configuration for the device. For information
about using a microSD/microSDHC card, refer to
MicroSD/MicroSDHC Card".
The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to Section 2.6, "Connecting to the
Description
Device ready
Device booting up
No power
Section 2.8, "Inserting/Removing the
Device".
Chapter 1
Introduction
3