HP ZBook 17 G4 Mobile Workstation Maintenance And Service Manual page 73

a. Service door (see
b. Battery (see Battery on page
c. Base enclosure (see
d. Hard drive(s) and internal frame (see
e. RTC battery (see
f. Right speaker and metal speaker frame (see
Remove the display LED board:
1. Open the ZIF connector (1) on the system board to release the display LED board ribbon cable, and then
release the ribbon cable (2) from the adhesive securing it to the computer.
2. Remove the screw (3) securing the board to the computer, and then remove the display LED board (4).
Reverse this procedure to install the display LED board.
Service door on page 30).
31).
Base enclosure on page
Hard drive(s) and internal frame on page
RTC battery on page 48).
33).
Speakers on page 49).
Component replacement procedures
33).
61