HP ZBook 17 G4 Mobile Workstation Maintenance And Service Manual page 46

Description
500 GB 7200 RPM RAW 7mm
500 GB 5400 RPM SATA RAW Hybrid 8 GB cache 7 mm
1 TB 7200 RPM SATA RAW 9.5 mm
500 GB 7200 RPM SATA FIPS RAW 7 mm
500 GB 7200 RPM SATA RAW SED 7 mm
HDD Hardware Kit
Internal frame
HDD connector bracket
HDD board
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see
b. Battery (see
c. Base enclosure (see
Remove the hard drive:
1. Disconnect the hard drive connector (1).
2. Remove 2 Phillips screws (2) from the hard drive bracket.
3. Loosen the four captive screws (3) that secure the hard drive to the bottom cover.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service door on page
Battery on page 31).
Base enclosure on page
30).
33).
Spare part number
703267-002
732000-002
766644-002
820572-002
820573-002
906117-001
906119-001
907157-001
929012-001