Roland System-8 Reference Manual page 17

[ K ] [ J ]
8
Use the cursor
Sound selection screens for the upper part and lower part
UPPER mmmm
User_Patch_Name
LOWER mmmm
User_Patch_Name
MEMO
Use the PANEL SELECT
PART:COMMON
Level
PART:COMMON
Level
Part parameters
[LOWER] [UPPER]
Use the PANEL SELECT
Menu Parameter
[ K ] [ J ]
[SHIFT]
+ cursor Cursor
(select sound)
(Patch name)
LEVEL
Pan
Range Lower
COMMON
Range Upper
Octave
PITCH
Transpose
Fine Tune
Rx Bend
Rx Mod
CTRL
Rx Hold
Rx Express
9
Press the [EXIT] button several times to return to the top screen.
MEMO
You can use the PART EDIT: COMMON: Range Lower/Upper parameters to specify the key range (lower and upper) of the upper and lower
parts.
buttons to select a parameter, and use the
mmmm: Model button
b-n
b-n:
Bank–Number
Patch name
b-n
[LOWER] [UPPER] buttons to select the part whose sound you want to edit.
[U]
0.0dB
[U]
Upper:
Lower: [ L ]
[L]
0.0dB
buttons to select the part whose sound you want to edit.
Value
[ K ] [ J ]
[VALUE]
-INF, -53.0dB–0.0dB–10.0dB
L5–CENTER–R5
C–G9
C–G9
-3–0–+3
-12–0–+12
-100–0–+100
OFF, ON
OFF, ON
OFF, ON
OFF, ON
[VALUE]
Examples of other editing screens
PART:COMMON
Level
PART:PITCH
Octave
Explanation
knob
Specifies the volume of each part.
This is used mainly to adjust the volume balance between
parts.
Specifies the stereo position of each part.
"CENTER"
For each part, specifies the lowest key of the keyboard range
that is sounded.
While this screen is shown, you can also make this setting by
pressing
For each part, specifies the highest key of the keyboard
range that is sounded.
While this screen is shown, you can also make this setting by
pressing
If you attempt to raise the lowest key above the highest
*
key, or lower the highest key below the lowest key, the
other setting changes to the same value.
Specifies the octave of the part.
Adjusts the pitch of the part in semitone units.
Adjusts the fine tuning of the part.
For each part, specifies whether MIDI pitch bend messages
are received (ON) or are not received (OFF).
For each part, specifies whether MIDI modulation messages
are received (ON) or are not received (OFF).
For each part, specifies whether MIDI hold messages are
received (ON) or are not received (OFF).
For each part, specifies whether MIDI expression messages
are received (ON) or are not received (OFF).
Editing a Performance
knob to edit the value.
[U]
0.0dB
[L]
-1
"R5"
is center, and is far right.
[SHIFT] button + keyboard note.
[SHIFT] button + keyboard note.
"L5" is far left,
17