Roland System-8 Reference Manual page 24

Making System Settings (SYSTEM Setting Screen)
Menu Parameter
[ K ] [ J ]
[SHIFT]+cursor Cursor
Gain
INPUT
In performance
*
mode, this is
enabled if PERFORM Tempo Sync
EDIT:INPUT:Prm
Src=SYSTEM
Type
Time
Level
Tap Time
DlyFeedback
DlyHiCut
INPUT(Dly)
DlyHDmp
In performance
* DlyHDmpF
mode, this is
DlyLDmp
enabled if PERFORM
DlyLDmpF
EDIT:INPUT:Prm
DlyDirLev
Src=SYSTEM
ChPreDly
ChLoCut
ChHiCut
FlManual
FlReso
FlLoCut
Type
Time
INPUT(Rev)
Level
In performance
*
Pre Delay
mode, this is
enabled if PERFORM Low Cut
EDIT:INPUT:Prm
High Cut
Src=SYSTEM
Density
Direct Level
Formant
INPUT (Vocoder)
Consonant
Parameters for
*
vocoder-related
Balance
settings
24
Value
[ K ] [ J ]
[VALUE] knob
-20dB, -10dB, 0dB, +10dB
OFF, ON
&
"DELAY/CHORUS parameters"
MEMO
You can edit the INPUT(Dly) Type, Time, and Level parameters by holding down the
the knobs of the DELAY/CHORUS section.
&
"REVERB parameters"
MEMO
You can edit the INPUT(Rev) Type, Time, and Level parameters by holding down the
the knobs of the REVERB section.
0–255
-40dB–0dB–+40dB
D128–0–W127
Explanation
Specifies the input sensitivity of the external input.
If this is "ON," the INPUT effect's delay time (TIME) is synchronized
to the tempo.
MEMO
You can turn this on/off by holding down the
pressing the [TEMPO SYNC] button.
(p. 12)
(p. 13)
Specifies the formant (vocal character).
Specifies the volume of the consonants.
D128:
Mic input (direct sound) only
0: Mic input and vocoder sound are at the same volume
W127:
Vocoder sound only
[VOCODER]
button and
[VOCODER] button and operating
[VOCODER] button and operating