Assembling The Outer Rails - Supero SUPERSERVER 1027GR-TRF User Manual

S S
UPER ERVER 1027GR-TRF/1027GR-TRFT User's Manual

Assembling the Outer Rails

Each outer rail is in two sections that must be assembled before mounting on to
the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend
outward.
2. Slide the front section of the outer rail (A), into the rear section of the outer
rail (B).
Figure 2-3. Assembling the Outer Rails
Secure to the
front of the rack
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the fl oor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Slide outer rails
together
Assembling the sections of
A
1
the outer rail
2-6
Secure to the
rear of the rack
1
B
Outer rail assembled